เพิ่มเพื่อน

Safety Modules

<<< Back to Safety


Module รวมสัญญาณจากอุปกรณ์ Safety ต่างๆ เช่น ปุ่ม Emergency stop, Interlocking switches, Safety light screens, two-hand controls และ Rope pull switches วัตถุประสงค์เพื่อการควบคุมการทำงานของอุปกรณ์ Safety และใช้งานที่สะดวกขึ้น รองรับได้ถึง 22 อินพุต สามารถเขียนโปรแกรมเพื่อสั่งการทำงานของ Input และ Output ได้คล้าย PLC พร้อมพอร์ตติดต่อต่างๆ เช่น EtherNet/IP,Modbus TCP และ USB สำหรับการดาวน์โหลดโปรแกรม

SC22-3/-3E Safety Controller E-Stop & Interlocked Guard
SC22-3/-3E Safety Controller

  • 22 input terminals for monitoring of both contact-based or solid-state outputs from Banner devices or any other
    manufacturer
  • Three pairs of independent solid-state safety outputs
  • Configurable auxiliary outputs for tracking inputs, outputs, lockout, I/O status and other functions
  • Reduces the complexity of interfacing multiple safety functions and devices

      รายละเอียดเพิ่มเติม …CLICK!!

E-Stop & Interlocked Guard

  • Monitors contact failure or wiring fault
  • Self-monitors to eliminate risk if module fails
  • Installs easily

      รายละเอียดเพิ่มเติม …CLICK!!

Universal Input

  • Monitors contact failure or wiring fault
  • Used with one or two solid-state PNP or hand/relay contact safety or non-safety devices

      รายละเอียดเพิ่มเติม …CLICK!!

two hand control Module Muting
DUO-TOUCH ® SG
Two-Hand Control Modules,

  • Monitors a single mat or a series of connected mats
  • Used with any standard 4-wire safety mat or edge triggered by a short in a contact plate or strip

      รายละเอียดเพิ่มเติม …CLICK!!

Muting

  • Suspends safeguarding during hazard-free times in the machine’s cycle
  • Allows material to move into or from the process, without tripping the primary safeguard
  • Monitors two or four hard-relay contact safety devices

      รายละเอียดเพิ่มเติม …CLICK!!

Safe Speed Monitoring

  • Monitors two sensors with PNP outputs for rotation and linear movements
  • Allows safety switches to release and safety gates to be opened when the speed drops below the dangerous level
Extension Relay Interface Relay  
Extension Relay

  • Provides additional safety outputs for a primary safety device with relay outputs
  • Offers two hookup options, depending on model: one channel, or one or two channel
  • Models with stop category 1 (OFF Delay)

      รายละเอียดเพิ่มเติม …CLICK!!

Interface Relay

  • Increases the switching current capacity of low voltage primary safety devices to 6 amps
  • Serves as a relay for primary safety devices with solid-state or hard contact outputs and external device monitoring
 

Application : ใช้ SAFETY MODULE ง่ายๆด้วย SC22…รายละเอียดเพิ่มเติม CLICK!!


 
  สอบถามข้อมูลเพิ่มเติมเกี่ยวกับสินค้า หรือปรึกษา
Sales Engineer สามารถติดต่อได้ที่

Tel: 02 10 50 555