• Rotating actuator connects directly to door hinge
• Actuator head rotates in 90° increments
• Housing is constructed of glass reinforced thermoplastic with plated steel actuator
• All models are insulated devices (IEC 60947-5-1)

Tel: 02 10 50 555

• Built-in hinge lever actuator attaches to doors or flaps which open 90° in one direction
• Actuator head rotates in 90° increments
• Housing is constructed of glass reinforced thermoplastic with plated steel actuator
• All models are insulated devices (IEC 60947-5-1)

Tel: 02 10 50 555

• Hinge operates to a full 180° range of motion
• In-line and right-angle hinge models are available
• Hinge supports an axial load of 750 N and more than 1,000 N in radial direction
• Housing is constructed of corrosion-resistant zinc die-cast

Tel: 02 10 50 555

• Hinge operates to a full 270° range of motion with safety switching point adjustable over full operating range.
• Setpoint is ± 1.5° adjustable after being set
• In-line and right-angle hinge models are available
• Hinge supports an axial and radial load of 1200 N
• Safety switching point is repositional
• Housing is constructed of corrosion-resistant stainless steel

Tel: 02 10 50 555

• Two locking mechanisms are available: spring lock with energized solenoid release and energized solenoid lock with spring release
• Rigid and flexible in-line actuators are available
• Actuator head can be rotated in 90º increments to eight possible actuator positions: four vertical and four horizontal
• Two models are available, based on voltage
• Design meets positive opening requirements for safety interlocks (IEC 60947-5-1)
• Insulated device on all models with plastic housing (IEC 60947-5-1)
• Protective earth terminals on all metal models (IEC 60947-1)

Tel: 02 10 50 555

• Rigid and flexible in-line actuators are available
• Actuator head rotates to four possible positions, in 90º increments
• Housing is constructed of die-cast aluminum with stainless steel actuator
• Design meets positive opening requirements for safety interlocks (IEC 60947-5-1)
• All models contain protective earth terminals (IEC 60947-1)

Tel: 02 10 50 555

• Mechanically coded actuators use two independent operating elements to minimize intentional tampering or defeat
• Rotating head requires no tools
• Four standard actuators are available, as well as an optional high-extraction-force adapter
• Housing is constructed of glass reinforced thermoplastic with plated steel actuator
• IP65 switch housing rating increases to IP67 with addition of a screw to the wiring chamber door
• Design meets positive opening requirements for safety interlocks (IEC 60947-5-1)

• Low profile for confined areas
• Limit switch design (EN 50047)
• In-line or right-angle actuator
• Actuator engagement from four side or four top positions
• Insulated device on all models (IEC 60947-5-1)

      รายละเอียดเพิ่มเติม…CLICK!!

• Flat-pack design for limited space requirements
• Actuator engagement from front, back, or either of two top positions
• Insulated device on all models (IEC 60947-5-1)

      รายละเอียดเพิ่มเติม…CLICK!!

Tel: 02 10 50 555

HINGE STYLE SWITCHES

• Three types are available—load-bearing hinge, hinged lever and rotating hinge
• One-piece switch eliminates need for alignment, engagement and risk of breakage of a separate actuator
• Design meets positive opening requirements for safety interlocks (IEC 60947-5-1)

• Hinge operates to a full 270° range of motion with safety switching point adjustable over full operating range.
• Setpoint is ± 1.5° adjustable after being set
• In-line and right-angle hinge models are available
• Hinge supports an axial and radial load of 1200 N
• Safety switching point is repositional
• Housing is constructed of corrosion-resistant stainless steel

• Hinge operates to a full 180° range of motion
• In-line and right-angle hinge models are available
• Hinge supports an axial load of 750 N and more than 1,000 N in radial direction
• Housing is constructed of corrosion-resistant zinc die-cast

• Built-in hinge lever actuator attaches to doors or flaps which open 90° in one direction
• Actuator head rotates in 90° increments
• Housing is constructed of glass reinforced thermoplastic with plated steel actuator
• All models are insulated devices (IEC 60947-5-1)

• Rotating actuator connects directly to door hinge
• Actuator head rotates in 90° increments
• Housing is constructed of glass reinforced thermoplastic with plated steel actuator
• All models are insulated devices (IEC 60947-5-1)

Tel: 02 10 50 555

• Sealed components resist water, dirt and are accommodating to misalignment
• Shifts in distance and alignment don’t compromise sensing
• Coded magnets minimize the risk of intentional defeat
• Compact size makes it possible to conceal the switch
• Magnets with different polarizations add security
• Three housing styles are available for flat or 30 mm barrel mounting
• For safety applications, switch must be used with Gate Monitoring Module

GM-FA-10J, SC22-3 Safety Controller or comparable control systems

Tel: 02 10 50 555