DUO-TOUCH ® SG
Two-Hand Control Modules, STB Compatible

• Modules work with Banner STB self-checking touch buttons or can be retrofitted with existing mechanical palm buttons to create a complete, ergonomic two-hand control system
• To ensure OSHA/ANSI Control Reliability, modules have a diverse-redundant microcontroller circuit and multiple redundant, force-guided (mechanically linked) output contacts
• Anti-tiedown logic requires that both touch buttons are activated within one-half second or less of each other
• Designed to meet Category 4 per ISO 13849-1 (EN 954-1) and functional Type IIIC two-hand control per ISO 13851 (EN 574)
• Removable terminal blocks allow convenient wiring and exchanging of modules without rewiring
• Optional mute inputs allow release of actuating buttons during the non-hazardous portion of the machine cycle
• Modules easily interface with DUO-TOUCH ® Run Bars with STBs for an economical, convenient means for actuation

Tel: 02 10 50 555

• Provides additional safety outputs for a primary safety device with relay outputs
• Offers four safety output channels
• Provides delayed or immediate outputs, depending on model
• Requires no adjustments
• If malfunctioning, signals primary safety device to react
• Responds in less than 35 milliseconds
• Mounts on DIN rail

Tel: 02 10 50 555

• Suspends safeguarding during non-hazardous times in the machine’s cycle
• Monitors hard-relay contact or PNP output safety devices
• Includes one non-safety auxiliary output
• Available in models for type 2 (Category 2) and Type 4 (Category 4) applications
• Offers two reset options: Automatic and Monitored Manual
• Uses diverse redundancy and self-checking, for control reliability
• Mounts outside a control panel, near the muted safeguard, or inside the control panel
• Features models for DIN-rail mouting or IP65-rated housing for flat mounting
• Installs easily
• Connects to supplemental safeguarding devices or E-stops
• Can be used as a Dual Controllers for safety devices, such as two Safety Light Screens whether the muting function is used or not

Tel: 02 10 50 555

• Modules monitor one or two solid-state PNP outputs or relay contact outputs from safety or non-safety devices, such as sensors, safety light screens, or one or two electromechanical contacts
• Category 2, 3 or 4 hookup of input devices is possible
• Module offers two reset options: Automatic and Monitored Manual
• Modules are an excellent choice for monitoring safety devices without external device monitoring (EDM) function
• Module goes into lockout mode if fault is detected
• Models are available with 3 normally open safety contacts, or 2 normally open safety and 1 normally closed auxiliary contact
• Output contacts are rated 6 or 7 amps, depending on model
• Housings are rugged polycarbonate and mount to standard 35 mm DIN rail
• Modules are rated NEMA 1 and IP20
• Module can be configured to monitor single or dual channel input devices using DIP switches under removable terminals

Tel: 02 10 50 555

• Modules monitor external devices for proper operation, contact failure or wiring faults
• Module goes into lockout mode if fault is detected
• Available voltages include 24V ac/dc; 24V dc; 115V ac or 12-24V dc; or 230V ac or 12-24V dc
• Modules serve to monitor positive-opening E-stop and interlocking switches
• Non-safety outputs are available on most modules
• Modules are available with an adjustable output delay of 0-20 or 0-200 seconds
• Modules offer reset options: Automatic, manual and monitored manual (depending on model)
• Ratings are NEMA 1 and at least IEC IP20
• Housings are rugged polycarbonate and mount to standard 35 mm DIN rail

Tel: 02 10 50 555